Accutrol Product Selection — Knecht Equipment Group

Skip to Content

Cooney Technologies

Accutrol Product Selection

Antrum IAQ Design

MK Plastics Product Selection

Cooney Technologies

Accutrol Product Selection

Antrum IAQ Design

MK Plastics Product Selection

Folder: Manufacturers

Cooney Technologies

Folder: Designer

Accutrol Product Selection

Antrum IAQ Design

MK Plastics Product Selection

MODE 01

AIRFLOW CONTROL

Design and configure AccuValve airflow control valves.

MODE 02

AIRFLOW MEASUREMENT

Design and configure VorTek and IAQ airflow measurement stations.

Product Model Configurator

Select your base unit and specifications to generate your model number.

1. Select Product Family

AVT Transmitter

AVC Integral Controller

AVR Room Control

⚡ Preset Configuration Quick-Select Fume Hood Preset Active

2. Size & Airflow Requirements

Valve Size:

Min CFM (Optional):

Max CFM (Required):

Estimated Pressure Drop @ Max CFM: --

3. Valve Hardware & Actuation

Housing Material:

Actuator Speed Category:

Actuator Model:

4. Integrated Options (Multi-Select)

AccuNet A high-speed network that combines airflow from multiple AccuValves into a single signal for fast, accurate room pressurization control. BACnet An open communication protocol that allows Accutrol devices to seamlessly integrate with building automation systems for monitoring and control. Flanges Factory-mounted duct flanges provide a secure, airtight connection for faster installation and improved sealing. Insulation Factory-installed insulation helps reduce condensation, minimize thermal losses, and improve energy efficiency. Shutoff Enhanced blade seals minimize air leakage, providing tighter shutoff for improved isolation and system performance. Wireless Bluetooth Built-in Bluetooth connectivity provides wireless access to the free Insight software for simplified setup, commissioning, diagnostics, and performance monitoring.

5. Tag Valve & Save

Valve Tag Name (Required - Max 20 chars, alphanumeric/spaces only):

Generated Model Number: Select a product family above...

Saved Valve Schedule

0 Valves

No valves added yet. Configure a valve and click "Add Valve to List".

Airflow Measurement Configurator

Select your application type to begin configuring your measurement station.

1. Select Application / Location

Duct (VTD)

Fan Inlet (VTF)

Fan Array (VTFA)

Outside Air (IAQ3)

2. VTD Duct Specifications

Duct Shape:

Probe Material:

Duct Diameter (inches):

Duct Width (inches):

Duct Height (inches):

Calculated Probe Array & Length: --

3. Cables & Enclosure

Factory Cable Size:

Enclosure Package:

4. Options (Multi-Select)

BACnet MS/TP An open communication protocol that allows Accutrol devices to seamlessly integrate with building automation systems for monitoring and control. Internal Transmitter Display Provides real-time local display of measured airflow and diagnostic readings on the device.

5. Station Tag & Save

Station Tag Name (Required):

Generated Model Number: VTDXX-XX-XX-XX

2. VTF Fan Inlet Specifications

Fan Type:

Inlet Bell Diameter (inches):

Recommended Sensor Configuration: --

Sensors Per Inlet:

3. Cables & Enclosure

Factory Cable Length:

Enclosure Type:

4. Options (Multi-Select)

BACnet MS/TP An open communication protocol that allows Accutrol devices to seamlessly integrate with building automation systems for monitoring and control. Internal Transmitter Display Provides real-time local display of measured airflow and diagnostic readings on the device.

5. Station Tag & Save

Station Tag Name (Required):

Generated Model Number: VTFXX-XX

2. VTFA Fan Array Specifications

Total Number of Fans in Array (1-16):

Recommended Sub-Array Distribution: --

3. Cables & Enclosure

Factory Cable Length:

Enclosure Type:

4. Options (Multi-Select)

BACnet MS/TP An open communication protocol that allows Accutrol devices to seamlessly integrate with building automation systems for monitoring and control. Internal Transmitter Display Provides real-time local display of measured airflow and diagnostic readings on the device.

5. Station Tag & Save

Station Tag Name (Required):

Generated Model Number: VTFAX-XXXX-XX-XX

2. Primary Air Intake Parameters

⚠️ CONSULT FACTORY: Calculated velocity exceeds maximum threshold (1900 FPM).

Duct Width (Inches):

Duct Height (Inches):

Design Airflow (CFM):

Primary Duct Calculated Metrics: Area: 0.00 sq ft | Aspect: 0.00 | Velocity: 0 FPM

Cable Length:

3. Secondary Transducer Configuration

Enable Secondary Airflow Transducer

Secondary Width (Inches):

Secondary Height (Inches):

Secondary Design CFM:

Secondary Duct Calculated Metrics: Area: 0.00 sq ft | Aspect: 0.00 | Velocity: 0 FPM

4. System & Options (Multi-Select)

BACnet MS/TP An open communication protocol that allows Accutrol devices to seamlessly integrate with building automation systems for monitoring and control. Wireless Bluetooth Built-in Bluetooth connectivity provides wireless access to the free Insight software for simplified setup, commissioning, diagnostics, and performance monitoring.

5. Station Tag & Save

Station Tag Name (Required):

Generated Model Number: IAQ3XXXX-000-0

Saved Station Schedule

0 Stations

No measurement stations added yet. Select an application, tag it, and click "Add Station to List".

© 2026 Knecht Equipment Group. All rights reserved.
Unauthorized copying, reproduction, modification, or distribution of this tool or its source code is prohibited. Results are provided for preliminary estimation only and should be independently verified.

Knecht Equipment Group, LLC

49 Boone Village, Ste. 118
Zionsville, IN 46077

(317) 650-0884
sam@knechtgroup.com